Compatible for VW Golf Corrado III 2.8L 2.9L VR6 Conrods Titanizing 4340 Connecting Rods

Application

Compatible for Audi TT 8N3 2003-2006 Coupe 3.2 24V VR6 quattro
Compatible for Audi TT Roadster 8N9 2003-2006 Convertible 3.2 VR6 quattro
Compatible for VW Bora 1J6 2000 Estate 2.8 VR6
Compatible for VW Corrado 53I 1991-1995 Coupe 2.9 VR6
Compatible for VW Corrado 1991-1995 2.8 12V VR6
Compatible for VW Golf MK III 1992 Hatchback 2.8 VR6
Compatible for VW Golf MK III 1998-1999 Estate 2.9 VR6 Syncro
Compatible for VW - Golf 1999-2005 (MK4) 2.8L 12V VR6 & 2.8L 24V VR6 engines
Compatible for VW Passat 3A2, 35I 1991-1996 Saloon 2.8 VR6
Compatible for VW Passat 3A5, 35I 1991-1997 Estate 2.8 VR6, 2.9 VR6 Syncro
Compatible for VW Sharan 7M8, 7M9, 7M6 1995-2000 MPV 2.8 VR6, 2.8 VR6 Syncro
Compatible for VW Transporter MK IV 1996-2003 Box 2.8 VR6
Compatible for VW Transporter MK IV 2000-2003 Platform/Chassis 2792ccm 204HP 150KW (Petrol)
Compatible for VW Transporter/Caravelle MK IV 1996-2003 Bus 2.8 VR6
Compatible for VW Vento 1H2 1992-1998 Saloon 2.8 VR6
(Note: Please confirm the dimensions before purchase the connecting Rods)

Specification

Performance Con Rods
Type: Forged 4340 aircraft chrome moly quality steel for racing
Power: 600hp ~ 800PS per set
Quantity: 6 Pieces a set
Bolts: Including Genuine 5/16" ARP 2000 bolts (Note: Extra cost for upgrading to ARP L19 bolts)
Material: Titanizing 4340 EN24 aircraft chrome moly quality steel for racing
Top acceleration: 9000rpm
Weight Tolerance: Balanced to +/- 1 gram in set

Dimensions

Center to center length: 164mm/6.457in
Big end diameter: 56.8mm/2.236in
Small end diameter: 20mm/0.787in
Big end width: 19.9mm/0.783in
Small end width: 19.9mm/0.783in

Feature

The density of titanium is significantly lower than that of steel, while maintaining considerable strength, which means that it is lighter than steel, but the strength is very similar.
1. Titanizing can further improve the bending strength of the product;
2. Titanizing will not affect the weight of the connecting rod;
3. Provide a wear-resistant layer, which greatly prolongs the service life of the parts;
4. Material: Titanizing Forged SAE 4340 Chrome Moly Steel for the highest strength and durability, dedicated for Racing.
5. Genuine ARP 2000 bolts ,Optional ARP L19 fasteners available as an upgrade.
6. H-Beam design reduces weight without compromising strength.
7.Heat-treating & Shot-peened for remained consistent and strong, Shot-peened finish to remove potential for stress risers.
8.100% CNC machined,Precision rod cap alignment dowels.
9.Bores finished to +/- .01 mm.
10.Balanced to within +/- 1 g per rod.
11. Each rod is magnetic particle tested to ensure free of flaws.
12.100% X-rayed, sonic tested.
13.Custom Service.

NOTE

Professional installation is highly recommended (No Instruction Included).
For any needs please contact us.