Diesel Heater 12V 2KW Tank Vent MotorHomes diesel heater for Van Car Caravan Trucks LCD Warm

lncl. 20% VAT
Item Number 3002913365
Stock In Stock

Combination offer

  • A
  • B
  • C
  • D
  • E
  • F
  • G
Introduction
Stay warm in the miserable winter storm with Maxpeedingrods Air Heaters,only need 12V power supply working in extreme temperature. Our Air Heaters are smooth, automatic room temperature control with temperature pre-set facility. It's suitable for longer periods of operation with low fuel and power consumption.

Application
Compatible for Motorhomes, Campervans, Caravans (also known as Travel Trailers and Camper Trailers), Fifth-wheel Trailers, Popup Campers and Truck Campers, Small Truck, Big Truck, Light Truck, Heavy Truck, Pickup, Van,Bus,Car,SUV, Boat, Forklift, Electric Tricycle, Engineering Vehicle, Yacht and so on.

Specification
Condition: New
Car Air Conditioning Type: Heating
Fuel Type: Diesel Only
Switch Type: LCD Control Panel
Heating Power: 1KW-2KW Adjustable
Rated Voltage: 12V
Fuel Consumption(L/H): 0.16-0.24
Working Temperature of the Heater: -40℃~+50℃
Working Temperature of the Oil pump: -40℃~+40℃
Item Size: 34x11.5x11.5cm
Fuel Tank: 40x31.5x8.5cm, ≈9L
Certification: CE/UKCA/RCM
Package Size(cm):48*45*27CM
Package Gross Weight(KG):6.6 KG

Package included
1 x Parking Heater
1 x Fuel Tank 9L (No need to punch hole)
1 x Air Outlet Pipe 
1 x Intake Pipe 
1 x Exhaust Pipe 
1 x LCD Switch
1 x Remote Controller (batteries included)
1 x Silencer
1 x Power Harness 
2 x Wind Head
1 x Tee Connector
1 x Fuel Pump 
1 x Fuel Hose
1 x Fuel Extractor
1 x Fuel Filter
1 x Air Filter
1 x Fixed Plate
1 x Fuel Pump Clamp
1 x Exhaust Wrap 
1 x Glove
1 x Fixed Accessories Set as Picture Shows
1 x Manual

Feature
1. WIDE RANGE OF APPLICATIONS
The diesel air heater can be used for truck, boat, car trailer, motorhomes, touring car, camper vans, caravans and so on.
2. EASY TO OPERATE
Easy to install , remove and maintain. The vehicle can be preheated by the remote control to eliminate the frost on the windows. 
3. DURABLE ALUMINUM BODY
The combustion chamber, the base and the heat-dissipating scale are all sand-blasted aluminum parts. It is integrally formed, with the heat dissipation fast and uniform.
4. FAST HEATING & LOW EMISSIONS
Volatile technology, the ceramic igniter heats the fuel to evaporate into a gas and burn it quickly and fully. Low emission, low fuel and power consumption, suitable for long running.
5. ENERGY SAVING
The optimized frequency conversion ECU can accurately control the injection frequency of the fuel pump and the intake air amount to extend the service life of the heater.
6. REDUCED NOISE
Effectively reduce noise through blower speed control, the speed of the fan is controlled linearly with the increasing power, and the metering fuel pump adopts an improved low frequency pulse with low vibration.
7. KEEP CONSTANT TEMPERATURE 
The intelligent overheating sensor can prevent the heater from running dry, and the LCD dynamic display will clearly show the running state of the machine.

Note
1.SWITCH OFF heater before refuelling!
2.DO NOT cut off electric power during operation.
3.DO NOT use heater in closed and/or unventilated places.
4.DO NOT start the heater with a cigarette lighter.
5.Place exhaust outlet outside to prevent ingress of exhaust fumes.
6.Seal all gaps between mounting plate and car body.
7.KEEP AWAY from fuel tanks, compression tanks, fire extinguisher, clothes, and other flammable objects.
Warranty: one year warranty for any manufacturing defect

Write a review

Add photos(0/4)

Note: HTML is not translated!
    Bad           Good

Enter your destination to get a shipping estimate.


CONTINUE
*

*Please select a category!

Install & Use Attention
1、Try to rotate the impeller to ensure that it can rotate freely and smoothly. If it cannot rotate freely, you need to use a tool to adjust the gap of the impeller.
2、The heater should be directly connected to the power supply to ensure that the battery is above 80A, the power supply current is above 20A, and the voltage is 11.5~12.8V.
3、The intake pipe and exhaust pipe should not be bent too much to keep the ventilation smooth, and ensure that at least 10cm or 0.79in in front of the air inlet
4、When the heater is turned on for the first time, it needs to match with remote control and lead the oil to the main engine.
5、Please gently tear off the protective film on the top of the LCD screen before use.
6、The distance between the fuel pump and the machine should be 1.5~2m.(For split machine)
7、Please provide the machine with good quality diesel.
8、EXhaust pipes must be installed outdoors or outside your vehicle.
9、When assembling the machine, don't reverse the direction of the oil pump.
10、When installing the heater, it must be horizontally with the outlet facing down.
11、When the machine first started, because there was no diesel oil inthe tube, if themachine could not sense the oil in two minutes, itwould stop automatically.After the machine stops running, restart it.
12、When you turn off the heater, it will continue to run until there hasno fuel in it.Do not forcibly disconnect the power supply, or it will damage the machine.
13、Turn the fan on about 1.5min, and the oil pump starts to work.


































DOWNLOAD MAXPEEDINGRODS OFFICIAL App FOR AN ENHANCED EXPERIENCE:

Search "maxpeedingrods" on Google Play or the Apple App Store for downloads

Official Quick Customer Support

Get timely assistance through our official support channel for a seamless experience

Curated Automotive Content Community

Explore hot car topics, connect with enthusiasts, and share favorites

Smart Control

Conveniently manage home devices remotely, such as air heaters and inverter generators