Universal Turbo Turbocharger T3 T4 T04E trim 73 44 V-band Oil cool 1.5-2.5L

lncl. 20% VAT
  • * Fitment: Perfect for 1.5-2.5L any 4/6 cylinder engines
  • * Horse Power: Capable of boosting horse power up to 420HP. This is a cost-effective turbocharger that will increase the users car's power output by 20-40%.
  • * Turbine Housing Material: Ductile Iron QT450-10; temperature resistant up to 700℃
  • * Turbine Impeller Material: K418 Alloy; high oxidation resistance & stability (resistance up to 900℃)
  • * Cast Aluminium Blades: Great airtight seal, airflow, light weight, and corrosion resistant
  • * Excellent Design: Durable floating bearing structure & high-precision blade dynamic balance
  • * 100% Balancing Test: This turbocharger you will receive has been balanced using the VSR machine technology
Stock In Stock
Item Number 3002906149

Combination offer

  • A
  • B
  • C
  • D
  • E
  • F
  • G
GGTT3-VL
GGTT3-VL
1
Cost effective turbocharger give your car 20-40% power than a non-turbo car of the same year, make and model
2
Ductile Iron QT450-10, the material used for the exhaust housing, is temperature resistant up to 700℃
3
K418 Alloy, the material used for the exhaust impeller, has high oxidation resistance & stability (resistance up to 900℃)
4
The cast aluminium blades are great airtight seal, airflow, light weight, and corrosion resistant

Application

Perfect for all 4 or 6 CYL, 1.5L- 2.5L engines
*Note:
1. Please confirm that there is enough space in your car to install this turbo before purchasing.
2. Lack of oil will cause the turbocharger shaft play and damage, please adjust the oil pressure and ensure that the turbocharger is fully lubricated.
3. Make sure actuator pressure lowering than 25psi, Oil pressure lowering than 2 bar.

Specification

Exhaust Inlet Flange: T3 4 bolt Flange
Exhaust Outlet Flange: V-Band Flange (ID/OD: 2.5"/3.1")
Turbine Side:
Turbine Trim: 74.2
Turbine A/R: 0.63
Turbine Inducer: 64.8mm
Turbine Exducer: 55.8mm
Turbine exhaust outlet : 79mm
Turbine exhaust inlet: 44.7mm(length)/85.8mm(width)
Compressor Side:
Compressor Trim: 48.1
Compressor A/R: 0.5
Compressor Inducer: 52.7mm
Compressor Exducer: 76mm
Compressor outlet:78 mm
Compressor inlet:51.5 mm
Oil Inlet: M12*1.25 & 2*M8*1.25
Oil Outlet: 2*M8*1.25
Bearing: Journal Bearing
Cooling Type: Oil Cooled
Wastegate: Internal Wastegate
Thrust Bearings: 270 Degrees
Hosepower: Up to 420 HP
Turbo Type: Individual
Universal Fitment: Yes
Finish:Polished
Condition: New
Accessories: You will get exactly as shown as picture above
Package Size:30x 28x 24 cm
Package Weight: 9180g

Package included

1x Turbocharger
1x Flange gasket
1x Vband Clamp
1x Adapter
2x Oil port gaskets
1x Bolt
1x Manual
1x Brochure
1x Sticker

Feature

*Product Material
1. Turbine housing :Ductile iron QT450-10 - temperature resistant up to 700℃
2. Steel turbine wheel:K418 alloy - high oxidation stability and resistance up to 900℃
3. Compressor housing:ZL104 aluminum with lightweight
4. Compressor wheel/blades:Cast aluminium blades – superior air tightness & corrosion resistance
*Product Performance
1. Cost-effective turbo increase 20-40% power for your car
2. Rich experience in turbo production and own factory
3. High-Speed oil seal ring and Precision clearance
4. Built for durability and strength
* Technology Advantage:
1. 100% balancing Test by TURBOTECHNICS VSR3
2. G3-min-Flow VNT Turbo testing
3. Advanced Actuator Tester/Programmer

Note

* Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage.
* Make sure the oil drain line is lower than the turbo itself.
* Ensure exhaust outlet are well sealed by welding
* The degree of modification of the universal turbo depends on your individual vehicle.Professional installation is highly recommended.
* This Turbo is not vehicle specific. Please check the specifications and verify compatibility prior to placing your order.
* Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed and eliminated (e.g. insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc.)!


Warranty: one year warranty for any manufacturing defect

Write a review

Add photos(0/4)

Note: HTML is not translated!
    Bad           Good

Enter your destination to get a shipping estimate.


CONTINUE
*

*Please select a category!

Recommended By
 
"This one has the Billet wheel on it while the other one has the cast and this should spin a lot more efficiently."
--YoungStatic
152K subscribers
 
 
"We're at 16 pounds of boost right now and it's making 500 horsepower so I'm really happy with it."
--Texas Honda Channel
44.7K subscribers
 
 
"This is cnc machined and generally billet wheels such as this one it'll keep the charge temperatures cooler which theoretically would make more horsepower."
--Matthew Chevalier
26.5K subscribers
 
 
"More durable , probably gives you more power and it looks cool in your engine bay."
--FRANCHIZE-EK3 (REDGEAR)
14.8K subscribers
 
 
"These turbos now are absolutely sick and reliable I know people that have ran these 200 300 kilowatts and are still running them no issues."
--Rex H
13.1K subscribers
 
 
"Yeah it looks like it's a pretty good turbo it's got the the gold Billet upgraded wheels that all the new Max speeding rods high performance turbos have and I believe they're balanced as well yeah it's balanced."
--Rex H
13.1K subscribers
 
 
"This appears to be a nice unit, that will be a good step towards boosting my Iroc-Z with a $200 Turbo!!!"
--GreenLightFilming
47.2K subscribers
 
 
"I've ran numerous nine second passes with these turbos and have had no problems with them."
--Robby V's Garage
13.1K subscribers
 
Please login or create an account to view
and download the installation.

LOGIN

REGISTER

Forgot password
Login with Email Account