Conrods For Audi RS3 TT RS 5 Cylinder 2.5L Connecting Rods

Product Code: CR-RS-5
Stock In Stock

Combination offer

  • A
  • B
  • C
  • D
  • E
  • F
  • G


For Audi RS3 TT RS 5 Cylinder 2.5L
For Audi RS 3 (8PA) 2.5L TFSI (EA855) | 340 PS
For Audi RS 3 (8VA) 2.5L TFSI (EA855) | 367 PS
For Audi RS 3 (8VA) 2.5L TFSI (EA855EVO) | 400 PS
For Audi TT RS (8J) 2.5L TFSI (EA855) | 340 PS
For Audi TT RS (8J) 2.5L TFSI (EA855) | 360 PS
For Audi TT RS (8S) 2.5L TFSI (EA855EVO) | 400 PS
Will fit following VW 2.5L 5 cylinder FSI engine codes: CEPA, BGP, BGQ, BPR, BRS, CBTA, CBUA.
Built in the Jetta, Golf or Audi RS3 / TTRS


TÜV Certification Con Rods
Type: Forged 4340 aircraft chrome moly quality steel for racing
H-beam Conrods Quantity: 5 Pieces a set
Bolts: Including Genuine ARP 2000 bolts
Note: Extra cost for upgrading to ARP L19 bolts
Bolts Size: ARP 2000 3/8" bolts
Tolerance: Balanced to +/- 1 gram in set
Piston Bolt Hole: +-4/1000mm
Power: 600hp ~ 800PS per set
Strength of the fastening (PSI): 220,000/230,000 PSI Torque: 48ft ≈ 65 NM
Top acceleration: 9000rpm
warranty: 2 years warranty for any manufacturing defect


Center-to-Center: 5.670"/144.00mm
Big End Bore: 1.9928"/50.6mm
Pin Size: 22mm
Big End Width: 0.862"/21.9mm
Pin Width: 0.862"/24.95mm


Professional installation is highly recommended (No Instruction Included)
Custom Service: If there's no conrods you need on our site, we would be happy to help determine your requirements and develop a solution with you to satisfy your needs.

Warranty Details

All Maxpeedingrods products have warranty and the warranty is subjected to different item (unless otherwise stated).
If you have a problem with our product, please contact us via Email first.
Full details of warranty are as follows:
If Goods become faulty during the period of the warranty for reasons unconnected with your acts, omissions or misuse of the Goods, you must notify us in writing and/or by completing a warranty claim form (including a description of the fault) and return such Goods to us. Such Goods shall be followed the return procedure and returned to the manufacturer for review, testing and examination, and the manufacturer will not arrange collection for the product. Based on the manufacturers' opinion, we will be afforded reasonable opportunity and facilities to investigate any claims made under the Warranty.

The above warranty is given by us subject to you having no liability in respect of any defect arising from wear and tear, willful damage, negligence, tampering of the Goods, incorrect fitting of the Goods by you and/or a third party, abnormal working conditions, failure to follow our and/or the Goods' manufacturers' instructions (whether oral or in writing), misuse or alteration or repair of the Goods without our approval.

Write a review

Add photos(0/4)

Note: HTML is not translated!
    Bad           Good

Enter your destination to get a shipping estimate.