Coilovers Height Adjsustable compatible for MINI COOPER R50, R53 2002-2006

Introduction

maXpeedingrods' maXpeedingrods-B1 series is ideal for those who want to change the old worn-out strut but improve handling at the same time. It features height adjustable and maintains the OE ride quality to the greatest extent.

Application

Compatible for MINI Cooper (R50, R53) Compatible for FWD 2001-2006
compatible for MINI Cooper S (R50, R53) Compatible for FWD 2001-2006
compatible for MINI John Cooper Works (R50, R53) Compatible for FWD 2001-2006
compatible for MINI One D (R50, R53) Compatible for FWD 2001-2006
compatible for MINI One (R50, R53) Compatible for FWD 2001-2006
compatible for MINI Convertible (R52) Cooper compatible for FWD 2002-2008
compatible for MINI Convertible (R52) Cooper S compatible for FWD 2002-2008
compatible for MINI Convertible (R52) Compatible for John Cooper Works compatible for FWD 2002-2008
compatible for MINI Convertible (R52) One compatible for FWD 2002-2008

Specification

Front top mount: OE top mount required
Rear top mount: OE top mount required
Damping adjustable: Not available
Camber adjustable: Not available
Height adjustable: Yes, lowering 25-75mm depending on the vehicle models
Spring rate Front: 4 kg/mm (224 lbs/in)
Spring rate Rear: 4.5 kg/mm (252 lbs/in)
Front spring inner diameter: 62 mm
Rear spring inner diameter: 62-119 mm
Spring length Front: 200 mm
Spring length Rear: 235 mm
Spring Preload advised: 7-10 mm
Damping rod diameter Front: Φ 20 mm
Damping rod diameter Rear: Φ 20 mm
Damping thread Front: M52×1.5 mm
Damping thread Rear: M52×1.5 mm
Twin -tube Diameter Front: 52 mm
Twin -tube Diameter Rear: 52 mm
Rod End Thread Front: M14×1.5 mm
Rod End Thread Rear: M10×1 mm
Front Coilover Length (Factory Setting): 495 mm / 19.49"
Rear Coilover Length (Factory Setting): 452 mm / 17.80"
Front Collapsed Length: 347 mm / 13.66"
Front Extended Length: 495 mm / 19.49"
Rear Collapsed Length: 348 mm / 13.70"
Rear Extended Length: 452 mm / 17.80"
Color: Silver body with black spring

Package included

Package included：
2x Front coil-overs
2x Rear coil-overs
2x C spanners

Dimension

Package Size: 61*50*20 cm
Weight: 19100 g

Feature

1. 0-25mm(depends on vehicle models) lower height adjustable

2. Dust boot, solid rubber bump stops

3. Aluminum components and steel lower mount brackets designed to balance weight and structural requirements.

4. Simple install, Easy to adjust.

5. Use the vehicle's original upper mounts (not included in our product kit).

Note

1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.

2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.

3. Impact wrench is prohibited during the installation, it will loosen or damage the product.

4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)

5. Regular maintenance is recommended for the coil-over. Applying WD-40 or a suitable protective spray every 3–4 months can help keep the components clean and moving smoothly.