GT45 Universal Turbo Turbocharger A/R 1.05600+ BHP w/ Oil Feed Drain Lines

GT45 Turbocharger & Oil Return Feed Line Kits

Application

Perfect for all 4.0L-6.0L engine

Horse Power: Capable of Boost Horse Power up to 600+ BHP

About turbo

Specification

Compressor
Compressor Trim: 49.6
Compressor Inducer Diameter: 69 mm
Compressor Exducer Diameter: 98 mm
Compressor A/R: 0.66

Turbine

Exhaust Inlet (Turbo Manifold) Flange: T4 Twin Scroll Flange

Exhaust Outlet Flange: 3.25 " Inlet Flange 4.25"  Clamp V-Band

Turbine Trim: 77.6

Turbine Inducer Diameter: 88 mm

Turbine Exducer Diameter: 77.5 mm

Turbine A/R: 1.05

Oil Inlet: M9 & 2*M8*1.25

Oil Outlet: M19 & 2*M8*1.25

Cooling Type: Oil Cooled

Bearing: Wet Float

Wastegate:  w/o Wastegate

Turbo Height: 243cm

Turbo Width: 273cm
 

About Oil lines

* OIL RETURN LINE: Length: 550mm || Inner Diameter: 21mm
* OIL FEED LINE: Length: 1000mm || Inner Diameter: 14mm

Notice

* Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage.
* Make sure the oil drain line is lower than the turbo itself.
* Ensure exhaust outlet are well sealed by welding
* Professional installation is highly recommended.
* This Turbo is not vehicle specific. Please check the specifications and verify compatibility prior to placing your order.
* Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed and eliminated (e.g. insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc.)!