Engine Timing locking Tool for Volkswagon Timing Tool VAG 1.2 1.4 1.6 FSI TSI
For professional engine repair.
For the fitting and expansion of camshafts, change of the control chain, testing.
For adjusting the camshaft control times, renewing the cylinder head gasket, etc.
Motor setting tool set control chain for vague 1.2 1.4 1.6 TSI FSI TFSI + dial Gauge
For vague engines 1.2 L TSI:
For Audi A1, A3, A3 back and A3 convertible
For seat Altea, Altea XL, Ibiza, Ibiza Coupe, Leon and Toledo
For Skoda Fabia, Fabia Combi, Octavia, Rapid, Roomster and Yeti
For VW New Beetle, Caddy, golf, golf plus, golf convertible, golf variant, Jetta, Polo and Touranium
For vague Motors 1.4 FSI:
For VW Golf 4, golf 5 and Polo 9N
For vague Motors 1.6 FSI:
For Audi A3, for VW Golf, Passat and Touranium
-AXU, Bag, BKG, BLF, BLN, BLP, BMY, BTS, BLG, BWK
-Cava, CAVB, Atrioventricular Canal, CAVD, CAVF, CAXA, CAXC and CDGA
-CBZA, CBZB, CBZC
OEM & PRRT NO.
All completely sorted in plastic cases
-Camshaft lock, to be used as OEM T10171
-Dial gauge holder, to be used as OEM T10170 (gauge holder with 274 mm total length, external thread M14 x 1.25 mm, for setting Upper dead center)
-Crank shaft lock, to be used as OEM T10340
-Hydraulic clamp lock, to be used as OEM T40011 (8 mm span, also for other use, for example for inclusion in magnetic base)
-Precision dial gauge for locating the piston OT (resolution: 0.01 mm/Measuring range: 0-8 mm/diameter: 41 mm)
-2x crank sprocket locking pin to use WieOEM T10341
(Two guide studs with 135 mm length, 24 mm long external thread M8 x 1.25 mm, hexagonal allen key width 6 mm)
-Dial Gauge Holder
-Crank shaft locking
-Hydraulic CLAMP Lock
-Precision Dial Gauge
-2x crank sprocket locking pin
-Cam Shaft Locking
-Condition: Brand NEW
-Manufacturer's warranty: 12 months Warranty
-It is an aftermarket tool, it serves as a replacement of the original tool.
-Instructions are not provided. We recommend a professional installation.
-If you have any questions, please feel free to contact us.
Enter your destination to get a shipping estimate.