Coilover Suspension Struts Kit compatible for Holden Commodore VE 2006-2013 Sedan Ute Wagon

Introduction

MaXpeedingrods-B2 coil-overs are designed as entry-level for street use. It features height adjustable, which offer you a lowered stance, and improved performance for your daily use vehicle.

Application

Compatible for Holden Commodore VE Sedan 2006-2013
compatible for Holden Commodore VE Wagon 2008-2013
compatible for Holden Commodore VE Ute 2007-2013

Specification

Top mounts: Front and rear OE top mounts required
Damping adjustable: Not available
Camber adjustable: Not available
Height adjustable: Yes, lowering 25-75mm depending on the vehicle models
Spring rate Front: 7 kg/mm (392 lbs/in)
Spring rate Rear: 8 kg/mm (448 lbs/in)
Spring length Front: 200mm
Spring length Rear: 185mm
Coilover overall length Front: 430mm-510mm
Coilover overall length Rear: 405mm-445mm
Spring Preload advised: 7-10 mm
Color: Golden body with black spring

Package included

Package included：
1 x Set of Coilover Spring Kit (2 Front + 2 Rear)
1 x Pair of wrenches for height adjustment
(Note: no top mounts included.)

Dimension

Size: 63*51*21 cm
Weight: 23550g

Feature

1. Lowered height adjustment from 25-75mm (depends on vehicle models)which allows a lower center of gravity and also add a more aggressive stance
2. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent
3. CNC machined Aluminum top mounts and lockers-- - excellent strength, and save weight
4. Heavy Duty Steel Lower Mounts--- Highly Durable & Reliable
5. High tensile spring--- 600,000 times continuously test to assure its high tensile strength.
6. All inserts come with fitted long rubber boots--- To protect the damper better and be durable.
7. Twin-Tube structure ---provides excellent handling & control characteristics for most driving conditions
8. Corrosion Finish - Anodized Aluminum And Powder Coated Carbon Steel Parts

Note

1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. (The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3–4 months will keep it smooth and clean, which helps to extend the lifetime.

Notice

Notice: The coilovers kit will "Lower your car" and does not keep to the original ride height.