Plasti Dip is a multi-purpose, air dry, specialty rubber coating, which protects the coated items from moisture, acids, abrasion and corrosion. It was mostly used on tools to provide better grip, but recently it is applied on cars as well.

 

Although Plasti Dip can be applied to the car itself, the most common use is on car wheels. Many cars today run black wheels on the street and most people manage this with only two cans of Plasti Dip. Besides, though Plasti Dip holds strong after it is applied, it can be easily peeled off if you don’t want it anymore. Fantastic, isn’t it?

 

How to Plasti Dip your car? Well, first you should find a place large enough to house your car, with roof on top to avoid sunlight. Next you should wash your car carefully and remember to dry it with cloth after cleaning. Then, pick up some newspaper to cover the area that you won’t want Plasti Dip on. After that, shake the can for one minute and start to spray section by section, which means, for example, you should add the first layer to the hood, and while the hood is drying, you should add the first layer to the roof. The average of layers is 4 or 5. Thus, it is important that the first layer is a light dusting because it is the bonding layer, which allows the rest of the layer to bond and stick to the paint. During the process, you had better wear a mask or eye protection. Finally, all you need to do is leaving your car to cure for four hours. So easy, isn’t it?

 

Well, if you want more information about car modification, you can contact Maxspeedingrods for help.