Exhaust Manifold compatible for Toyota Corolla 1.8L V4 Catalytic Converter 1998 1999 2000 2001 2002

lncl. 20% VAT
Item Number item_number
Stock In Stock

Combination offer

  • A
  • B
  • C
  • D
  • E
  • F
  • G

Application

Compatible for Chevrolet Prizm 1.8L V4 1998-2002
Compatible for Toyota Corolla 1.8L V4 1998-2002

Specification

Emissions:48-State Legal (Cannot Ship to CA or NY)

Series:Direct Fit

Interchange Part Number:15844

Tube material:Stainless Steel

Connection Type:Clamp-on

Substrate Material: Ceramic

Overall length:22.63 in. 

Main Piping Diameter:2in.

Inlet type:Single (Flare)

Outlet type:Single (Pipe Connection)

Oxygen sensor ports:Yes

Oxygen Sensor Location:Post Converter

Air Tube Adaptable:No

Package Included:

1x Catalytic Converter(Includes Gasket & Bolt as picture shown)

Features

• 100% Brand new. 

• 1 year warranty for any manufacture defect. 

• High flow design to provide more oxygen to your engine for an increase in power and performance. 

• Fully tested under extreme condition for heat resisitance and long-life use. 

• Complementary accessories (nuts, washers, etc.) are provided free of charge. 

• Great emissions control device with stable performance, reliable quality and long service life. 

• High flow rate design, will not slow down the exhaust speed,while improve engine performance.

Note

1.Due to state emissions regulations, we cannot ship this item to the state of California as it is not C.A.R.B( California Air Research Board) approved for use in this state. 

2.Due to New York state emissions regulations, this item cannot be installed on a California emissions equipped vehicle in the state of New York.

3.If your vehicle is registered in California or New York, DO NOT BUY This item.

4.If your vehicle MEETS California REQUIREMENT, BUT NOT REGISTER In California or New York. This will work on your vehicle.

5.All emissions information for a vehicle can be found on a tag under the hood. If the tag is missing, you can contact a dealership with your VIN to determine which emissions system your vehicle is equipped with.

6.Quality fully guaranteed and professional installation recommended. If you want to perform an installation yourself, a high temperature sealant for metal flanges, which ensures an instant, low-pressure seal and prevents exhaust leaks is highly recommended and please buy yourself.

7.Even if your car is shown in the compatibility, you must read the description and any notes carefully.

8.Please check the fitment detail and OEM number before purchasing.

9.Please double check that the photo match the product you want.

10.They may require specialized fabrication and welding for installation.

It can't fit the original heat shield perfectly. It also can work without heat shield.


Attention

1. Maintenance:If the following problems occur, the catalytic converter needs to be cleaned

1)The exhaust pipe is stuffy and the exhaust is not smooth

2)After cleaning the throttle and fuel injectors, the vehicle still has insufficient power and increased fuel consumption

3)When a cold car starts, it often smells very stinky, and it also contains the smell of gasoline

2. Not legal for use in California, compatible for Colorado, New York or Maine

3. Five Checks Before Replacing a Catalytic Converter


Converters don’t fail on their own, complete these five checks before replacing a catalytic converter:

1)Retrieve / repair all PCM trouble codes, check for any available TSBs or PCM re-flash updates

2)Repair all exhaust leaks

3)Make sure vehicle is in proper fuel control

4)Always check for internal coolant leaks and excessive oil consumption

5)Make sure you have the right part for the application

Write a review

Add photos(0/4)

Note: HTML is not translated!
    Bad           Good

Enter your destination to get a shipping estimate.


CONTINUE
*

*Please select a category!

Warranty Details

All Maxpeedingrods products have warranty and the warranty is subjected to different item (unless otherwise stated).
If you have a problem with our product, please contact us via Email first.
Full details of warranty are as follows:
If Goods become faulty during the period of the warranty for reasons unconnected with your acts, omissions or misuse of the Goods, you must notify us in writing and/or by completing a warranty claim form (including a description of the fault) and return such Goods to us. Such Goods shall be followed the return procedure and returned to the manufacturer for review, testing and examination, and the manufacturer will not arrange collection for the product. Based on the manufacturers' opinion, we will be afforded reasonable opportunity and facilities to investigate any claims made under the Warranty.

The above warranty is given by us subject to you having no liability in respect of any defect arising from wear and tear, willful damage, negligence, tampering of the Goods, incorrect fitting of the Goods by you and/or a third party, abnormal working conditions, failure to follow our and/or the Goods' manufacturers' instructions (whether oral or in writing), misuse or alteration or repair of the Goods without our approval.

Please login or create an account to view
and download the installation.

LOGIN

REGISTER

Forgot password
Login with Email Account