Turbo CHRA for BMW 320d E46 110kw/150hp Turbocharger Cartridge GT1749V 750431

Product Code: 750431-JX
Stock In Stock

Combination offer

  • A
  • B
  • C
  • D
  • E
  • F
  • G

Application

for BMW Compact 320TD (46) - 150 HP - 110KW, engine 2.0L, engine code M47TU, year: 2001 -
for BMW 320D (46) - 150HP - 110KW, engine 2.0L, engine code M47TU, year: 2001 -
for BMW 520D (46) - 150HP - 110KW, engine 2.0L, engine code M47TU, year: 2001 -
for BMW X3 (E83/E83N) - 150HP - 110KW, engine 2.0L, engine code M47TU, year: 2001
Turbo Model:GT1749V , GT1748V

OEM/Part No.

750431 , 750431-1 , 750431-2 , 750431-3
750431-4 , 750431-5 , 750431-6 , 750431-7
750431-8 , 750431-9 , 750431-10 , 750431-12 , 750431-13
750431-0002 , 750431-0003 , 750431-0004 , 750431-0006
750431-0007 , 750431-0009 , 750431-0010 , 750431-0012
750431-0013 , 750431-5002S , 750431-5003S , 750431-5004S
750431-5006S , 750431-5007S , 750431-5009S
750431-5010S , 750431-5012S , 750431-5013S
7787628G , 7787628H , 11657787628G , 7794140D

Features

* Condition: 100% Brand New&Factory Balanced
* Bearing Type: Journal Bearing
* Accessories: You will get exactly as shown in the picture above
* Warranty: 2 years warranty for any manufacturing defect

Notice

* Please confirm your old turbo part number matches up with one of the part numbers above
* Professional installation is highly recommended (No Instruction Included)
* It is for repairing or rebuilding the complete turbo

Check list before installation

1. Replace oil supply lines and fittings. These lines often become plugged with decomposed oil which restricts oil flow and drainage.
2. Do not used silicone or thread tape
3. Make sure all openings to turbo are open and not plug or capped off.
4. Shut off fuel or disable ignition and crank the engine for at least 15 seconds or until oil pressure is raised
5. Allow engine to fast idle (1,000 RPM) for 3 - 5 minutes to for Seat turbo seals
6. Always let engine idle for 3 -5 minutes before shut down, otherwise the turbo will continue to spin without oil lubrication and pressure
7.When changing oil, be sure to the prime oil filter

Warranty Details

All Maxpeedingrods products have warranty and the warranty is subjected to different item (unless otherwise stated).
If you have a problem with our product, please contact us via Email first.
Full details of warranty are as follows:
If Goods become faulty during the period of the warranty for reasons unconnected with your acts, omissions or misuse of the Goods, you must notify us in writing and/or by completing a warranty claim form (including a description of the fault) and return such Goods to us. Such Goods shall be followed the return procedure and returned to the manufacturer for review, testing and examination, and the manufacturer will not arrange collection for the product. Based on the manufacturers' opinion, we will be afforded reasonable opportunity and facilities to investigate any claims made under the Warranty.

The above warranty is given by us subject to you having no liability in respect of any defect arising from wear and tear, willful damage, negligence, tampering of the Goods, incorrect fitting of the Goods by you and/or a third party, abnormal working conditions, failure to follow our and/or the Goods' manufacturers' instructions (whether oral or in writing), misuse or alteration or repair of the Goods without our approval.

Write a review

Add photos(0/4)

Note: HTML is not translated!
    Bad           Good

Enter your destination to get a shipping estimate.