A vehicle brake is used to slow down and eventually stop a vehicle by converting its kinetic energy into heat. Thus, once the brake breaks down, you cannot go anywhere or you will never stop the running. But you may ask how I know the brake of my car is in trouble. Don’t worry about it. Maxspeedingrods is here to help you.


First, very thin brake pads is a definite indication that you need new ones. The brake pad is the very thing that wears itself to convert the friction to thermal energy and thus slows down the car. Hence, if you find your brake pad is less than a quarter inch thick, you definitely need a replacement. Also, you can be reminded to replace the brake pad by a screeching sound from a small piece of metal called indicator. However, your brakes may squeal too if your car is exposed to water and then left sitting. Anyway, go and check your car if you hear this screeching sound.


If you have a pulsating brake pedal, you may have warped rotors in your car and you’d better get them checked immediately. Warped rotors can be caused by improper lug nuts tightening procedures, for the wheel nuts with uneven torque will push and distort rotors at high temperatures. Thus, making sure that each lug nut is tightened to the same specifications is very important.


If your car pulls one side to another when you press the brake, you might get your brake pads replaced, for this just indicates the current ones are wearing unevenly.


If you feel your brake pedal is spongy when pressing it, you might have a problem with the hydraulic system, such as an air leak or a brake fluid leak. To check for a fluid leak, you can put white cardboard under the car overnight to see if there is any fluid on that the next morning.


Well, if you want more information about car maintenance, you can contact Maxspeedingrods for help.