In recent years, as the international oil prices and our environmental awareness rising continuously, some cars have been taken the leading technologies for energy conservation. The most widely used technique is turbocharger, which with "T" models. Despite the turbocharger is more ahead compared to the conventional naturally aspirated models, but it is also delicate notoriously. Today, we introduce you to some tips of turbocharger vehicle maintenance.


Turbocharged car owners should to change the oil frequently and maintain it in time


In the process of turbocharged engine operation, since the turbo driving gas discharged by the engine cylinder, the temperature up to about 700 ?. Under the high load conditions, the temperature can reach 1100 ?. So the turbocharged cars need higher consumption and lubrication oil particularly.


If you feel your car is good in condition and you don’t want to maintain the turbo prematurely, but you also need to check the oil punctuality. You’d better take out the oil gauge from the oil storehouse once a week. The vernier is divided into three areas, there are MIN and MAX marks, the line area at the intersection between the MIN and MAX, means you can increase the oil or not, but when below the MIN mark, you must increase the oil, when the oil line located above MAX area, it is not to increase.


Despite following the turbocharger technology promotion, it has been not necessary to warm-up the car for a few minutes, but before the various parts has not been oil lubricated adequately, it is also will cause some parts damaged excessively under the high-speed operation. Therefore, after launching the turbocharged engine car, you shouldn’t hurry to rush the throttle, you’d better operate the car in low speed for 3 to 5 minutes, so that the oil pump has time to meet the oil transported to all the turbo parts. When the oil temperature rises gradually, the turbocharger will be fully lubricated. Speeding up now, it will take you more comfortable and safely.